Water Well Drillers in Lee County, Texas

About water well drilling in Lee County

Water well drilling in Central Texas ranges from routine 200-foot shallow wells in strong-aquifer counties like Williamson and Hays to deep, difficult 800+ foot wells in granite-underlain counties like Llano and Burnet. A new residential well typically takes 3–7 days from spud to pump installation, but permit review and drilling scheduling can extend the total project timeline to 6–10 weeks during peak spring/summer season. The Texas Department of Licensing and Regulation (TDLR) licenses well drillers and pump installers, and every legitimate contractor has a searchable license number in the TDLR public database. Groundwater conservation districts (GCDs) also regulate well spacing, capacity, and reporting — some rural counties fall inside GCDs like Blanco-Pedernales, Hays Trinity, or Lost Pines, which require separate GCD permits on top of TDLR licensing.

Local factors in Lee County

Lee County sits over the Carrizo-Wilcox Aquifer — similar geology to Bastrop and Milam. Well depths are typically 300–600 ft, and Lost Pines GCD regulates permits. Water quality issues (iron, hardness) are common and treatment is often needed.

What drives the cost of water well drilling

• Total drilled depth — most of your quote is per-foot drilling ($25–$45/ft in soft rock, $50–$85/ft in granite or hard limestone)
• Casing material and diameter (PVC vs steel, 5" vs 6" vs 8")
• Pump horsepower — required GPM and total dynamic head determine pump size
• Distance from well to pressure tank / house — long runs need larger wire and pipe
• Water treatment (softener, iron filter, UV) if the aquifer runs hard or has bacteria

Permits, licensing, and process

You need a TDLR-licensed driller — no exceptions. Before drilling, the driller files a State of Texas Well Report (SWR) with TDLR within 60 days of completion. In some counties, your Groundwater Conservation District requires a separate drilling permit filed 2–4 weeks before drilling begins. The driller usually handles both filings; ask up front whether their quote includes GCD fees. Also verify whether your specific tract falls inside a GCD boundary — the Texas Water Development Board has a public map.

Common mistakes to avoid

• Not verifying TDLR license — anyone can call themselves a "well driller" without one, but they cannot legally drill in Texas
• Accepting a per-foot quote without a "not-to-exceed" cap — some drillers keep drilling past a productive depth
• Skipping water quality testing — bacteriological (coliform) and mineral panel should be standard on any new well
• Not asking about grouting — a properly grouted well protects the aquifer from surface contamination and is required by TDLR

What to ask every contractor

• What is your TDLR driller license number and current status?
• What is your not-to-exceed price if drilling exceeds expected depth?
• Does the quote include the GCD permit fee (if applicable in this county)?
• What is your standard well casing material and grout method?
• Do you include a water quality test panel after completion?

Best time of year

Spring and early summer (March–June) are peak drilling season across Central Texas — expect 4–8 week waits. Fall (September–November) usually has the shortest scheduling windows and slightly softer pricing.